By David Zielinski
Before beginning to weld you must have a clean joint and your MIG welding machine must be set properly. I cannot stress this enough! MIG welding is very easy to learn but since it is a semi-automatic process much of the skill relies on machine set-up! Once you have that down you are ready [...]
By Ted Vinci
Tools Needed:
Drill
3/4″ speed bore drill bits – approximately 1 for every 20 balusters.
Caulking Gun
Angle Grinder or Metal Saw to cut iron balusters
1-5/8″ drywall screws
Jig Saw or circular saw.
Products needed:
Iron balusters of your choice and color
Baluster Shoes
Epoxy adhesive or polyurethane adhesive
Installation Instructions:
LAYOUT GUIDE AND DESIGN – Before ordering your balusters, make a detailed drawing of [...]
