Welding Tips Podcast
WTS 10 | MIG vs. TIG - Which Welder Is Best For You
In this episode you’ll learn the pros and cons of both MIG welding and TIG welding. If you are a welding beginner, you need to check out this episode.
Episode Length - 14:12
Listen & Rate In iTunes
Download This Episode
WT 09 | Cutting Torch Basics And The Welders Best Friend
In this episode you will learn how to get started with your oxygen/acetylene cutting torch. Surprisingly, most people have no clue how to get their torches started correctly or even how cut with them.
There’s nothing more embarrassing than everyone hearing that loud *POP* over and over because you can’t keep your torch lit.
As a welder, do you know who your best friend is?
Listen and learn who your best should be and how to find them.
Episode Length 19:47
Download this episode to keep
TAKE ACTION
To take advantage of my mistake that I talked about in this episode - Go Here
Let me know what you think about think about this episode. Leave your comment in the comments section or in the comment box for this post.
Until Next Time - Keep The Sparks Fly’n
PS> This is the only chance you’ll have to get the course this low. It will never be offered at this price again. There is only 2 days left. ACT NOW to save big.
WT 08 | Tips And Tricks For Welding Galvanized Metals
In the episode you will learn some of the best tricks for welding galvanized metals. You will also learn how to avoid and treat one of the greatest fears of welding steel that’s been galvanized, Metal Fume Fever.
We also answer a great question about keeping finials straight when welding custom fencing
and…
an At Home Welder webinar?
Episode Length - 17:00
To Subscribe and Rate this podcast in iTunes >>CLICK HERE<<
COMMENTS & QUESTIONS
Have you ever experienced metal fume fever? What was your remedy and what was the project?
Let us know by leaving your answers in the comment box HERE
WT 07 | Choosing The Right Welding Gas
In this episode we will cover how to choose the right welding gases and when is the best time to use them.
It is very easy to just use what you have and think that you’re safe. But in many cases you have to use specific gases for different materials. If you use the wrong ones, your welds won’t be worth a dime.
I also answer a great finishing question on how to get that rustic look without actually letting your metal rust.
Rust = Death to metal
And the 1st ever At Home Welder contest is born with a grand prize worth over $500.
Episode Length - 17:09
Listen in iTunes
The Contest
Send your name ideas to weldingtips@theathomewelder.com
I’m going to choose the best one and give the winner the entire railings course for free. That’s well over $500 worth of material. Even if I decide not to use it, you still get the course.
Questions & Comments
As always, if you have any questions or comments, leave them in the comment box or email them directly to me at weldingtips@theathomewelder.com
WT 06 | How To Avoid Blowing Holes In Your Metal When Welding
In this episode you will learn some excellent techniques on how to control your welding heat to avoid nasty blow
throughs and how to repair them if they do happen.
In the Q&A session, an AHW community member gets an answer to one of the most frequently asked questions by beginning welders.
Episode Length - 17:20
TAKE ACTION
Practice the pull away technique described in the show. This is the best technique to control your heat without having to stop welding. If you can master this technique, you’ll greatly speed up welding which will allow you to move on to something else.
QUESTIONS?
Leave your comments and questions in the comment box. I love hearing what you have to say and they types of projects that you’re working on.
AHW 05 | How To Avoid Heat Distortion
In this episode you will learn the best way to avoid heat distortion when welding sheet metal. It’s easier than you think to master great welds when working with sheet metal.
I answer a great question from an AHW community member about how to find the perfect materials and I unleash a huge announcement about the future of The At Home Welder Podcast.
Episode Length 17:21
COMMENTS & QUESTIONS
Do you have a question that you want answered on the show?
Leave them in the comment box, Shoot Me A Bird, or email
